Grizzly Fishing Equipment H6167 User Manual

MODEL H6167  
2000 LB. WINCH  
w/STEEL CABLE  
INSTRUCTIONS  
To reduce the risk of serious personal injury  
while using this winch:  
1. Always wear ANSI approved eye protec-  
tion when operating the winch.  
2. Be sure the cable is not damaged. If the  
cable shows any signs of fraying or any  
other damage, do not use the winch.  
3. Do not exceed the pulling capacities of  
the winch.  
4. Do not stand in line with cable while  
operating the winch. If the cable breaks  
it will whip back along this line.  
5. Keep all loose clothing, hair, jewelry  
and hands away from winch during  
operation.  
Figure 1. Model H6167.  
If you need help with your new item, call our Tech  
Support at: (570) 546-9663.  
6. Use a spotter to help ensure safety  
when using the winch. Be sure the spot-  
ter is out of the way of the vehicle and  
the cable before operating the winch.  
7. Do not replace the cable with one of  
lesser strength.  
8. Do not loop the cable around an object  
and back to itself. Use a chain or towing  
strap if necessary.  
Specifications  
Horizontal Pulling Capacity ................. 2000 Lbs.  
Cable .............................................32' x 14" Steel  
Ratchet .................Two-Direction with Freewheel  
Gear Ratios ........................................4:1 and 8:1  
Mounting Bolt Hole Size..................................38  
"
Bolt Grade .............................................. Grade 8  
9. Do not use the winch to lift vertical  
loads. It is designed for horizontal loads  
only. Lifting vertical loads may cause  
the winch to fail and drop the load.  
10. Do not use the winch to support loads  
for long periods of time.  
11. Avoid dynamic loading caused by yank-  
ing or jerking of the cable. This may  
cause the winch to release its load.  
CoPyRiGHT © oCToBeR, 2008 By GRizzLy inDuSTRiaL, inC.  
WARNINg: NO pORTION OF THIS MANUAL MAy BE REpRODUCED IN ANy SHApE  
OR FORM WITHOUT THE WRITTEN AppROvAL OF gRIzzLy INDUSTRIAL, INC.  
#JB11231 PRinTeD in CHina  
 
2. Remove the lock nut that secures the handle  
gear Ratios  
to the shaft.  
The Model H6167 has a two available gear ratios.  
By placing the handle on one of the two shafts,  
you can change the gear ratio to a 4:1 or an 8:1  
ratio.  
3. Remove handle and handle bracket, reposi-  
tion them to the necessary shaft, making sure  
to align the flats on the shaft with the flats  
on the handle bracket, then replace the lock  
nut.  
To change the gear ratio:  
1. use Figure 4 to determine which handle  
position is required for the desired ratio.  
if the handle is already placed in that posi-  
Damage to your eyes could  
result from using this item  
without proper protective  
eyewear.  
tion, no further action is required.  
if the gear ratio you want requires the han-  
dle to be repositioned, continue to Step 2.  
Operations  
1. Move the ratchet control lever to the free-  
wheel position to feed slack until the cable  
hook reaches the load.  
4:1 Ratio  
Shaft  
8:1 Ratio  
Shaft  
Handle Bracket  
Handle  
2. Hook the load, then move the lever to the  
winching position. Crank the handle to move  
the load. once the load is secured by other  
means, release the hook from the load.  
Lock nut  
Figure 4. Gear ratios.  
-3-  
H6167 2000 LB. Winch w/Steel Cable  
 
"UY $IRECT AND 3AVE WITH 'RIZZLY® n 4RUSTEDꢀ 0ROVEN AND A 'REAT 6ALUEꢁ  
6ISIT /UR 7EBSITE 4ODAY !ND $ISCOVER  
7HY 'RIZZLY® )S 4HE )NDUSTRY ,EADERꢀ  
s 3%#52% /2$%2).'  
s /2$%23 3()00%$ 7)4(). ꢃꢄ (/523  
s %ꢂ-!), 2%30/.3% 7)4(). /.% (/52  
ꢂ/2ꢂ  
#ALL 4ODAY &OR !  
&2%%  
&ULL #OLOR #ATALOG  
 

Grizzly Lathe G1067Z User Manual
Grizzly Saw H3118 User Manual
Haan Carpet Cleaner SI 46 User Manual
Hamilton Beach Slow Cooker 33144 User Manual
Hamilton Beach Toaster 22502 User Manual
Harbor Freight Tools Nail Gun 46240 B User Manual
Healthrider Home Gym HRCR91081 User Manual
Honeywell Fan HS 160R User Manual
Hubbell Switch LXi 2800 User Manual
Hypertec Carrying Case Z0104 User Manual