Gianni Industries Door EM 750 User Manual

EM-750 Midi Surface  
Water-Proof Electromagnetic Lock  
Regular Installation  
Magnet  
Armature  
Magnet  
Armature  
Waterproof Test:  
Reference to IEC 60529 Edition 2.1: 2001-02-IPX7  
(Power Off)  
(On Power)  
Statement  
The EM-750 Electromagnetic Lock design with no  
mechanical parts but magnetic force to secure and release the  
doors, suitable for use in areas which required access  
controlled or egress such as exit door.  
The Electromagnetic Locks are totally sealed in an epoxy  
filled stainless steel case for water-resistant and vandal-  
resistant purpose. A threaded conduit fitting ensures weather  
resistant protection of the wiring therefore it is ideal for indoor  
and outdoor applications, even in severe weather.  
Unique Anti-Residual design  
When there is no power, there will be no holding force, and the push-off  
button will pop out immediately, to release the Electromagnetic Lock  
and the Armature Plate for no residual magnetism.  
We offers up to 800 pounds holding force with 12V DC  
power input (24V DC or 12/24V DC dual input voltage  
available by special order), and with the full range of optional  
brackets, it can be installed on all type of door frames such as  
Hollow, Wooden door. It is the best choice for electronic  
security industry and system integrators.  
Specifications  
Voltage Tolerance: 15%  
Current Draw: 340mA@12Vdc (at temperature 20C)  
(Further notice for diverse input voltage on special order requirement)  
Magnetic bond sensor monitor output (EM-750R)  
(SPDT rated 0.25A@12V DC), remotely monitors the door  
lock or unlock status. (N.C. Output--Door opened; N.O.  
Output--Door closed)  
Operating Temperature: -10~55C )14~131F(  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
<current temperature +20C  
This series of Waterproof Magnetic Lock is made with epoxy  
potting compound and is protected by this compound. Also,  
GEM Waterproof Series Magnetic Locks have been proved to  
have withstood  
a
water resistance as established in  
accordance with the test procedures of IPX7, IPX8 through a  
trusted third party. Therefore users need not worry that the  
lock will be rusted or sparked, if the lock is using in outdoor  
applications and installing in confined space where any  
inflammable gas.  
Holding Force: Up to 800 lbs )363 Kg(  
Dimensions:  
Magnet:(L) 230, (W) 46, (D) 30 mm  
Armature Plate:(L) 185, (W) 45, (D) 14 mm  
Special Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight )Approx.(: 3.0 Kg  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-EM-750 Ver. C Published on 2008.05.12  
 

Edimax Technology Network Card EN 9235TX 32 User Manual
Ei Electronics Smoke Alarm Ei 204EN User Manual
Euro Pro Food Processor QB900W 30 User Manual
Extron electronic Dishwasher P 2 DA2 User Manual
Fisher Price Baby Swing K7923 User Manual
Freecom Technologies CD Player Beatman Mini CD I User Manual
FujiFilm Camera Lens YF4A SA2B User Manual
GE Clothes Dryer DBB5500 User Manual
GE Computer Drive GXSL55R User Manual
Gefen Cable Box EXT DVI 2 MDP User Manual